2.
3.
through the opening of the compressed air
mini oil-fog lubricator (8). Also take a look at
4. The quick coupler of the air impact wrench
now has to be connected with the compressor.
Switch the compressor and setup a pressure of
6.2 bar.
5. To start the tool, press the trigger (2). The
trigger also is used to control the speed of
faster it will run. When working, hold the tool
6.
backside of the unit.
clockwise
7.
turn it to the desired stage.
Lowest stage: maximum torque 140 Nm
Highest stage: maximum torque 340 Nm
8.
when exchanging the socket/tool and when
from the air impact wrench.
11
www.DeubaXXL.de
Tips for use
Use the air impact wrench for screwing on as
well as unscrewing of nuts and bolts. It creates
and screws.
Care and Maintenance
required. Dust, dirt or corrosion residues from
of the tool and will cause technical problems.
equipment removes moisture and dirt from the
air, controls the working pressure and supplies
that include abrasive or aggressive chemicals as
parts.
Make sure liquids do not enter the tool and
never put it into liquids. The compressed air
drain and clean the air lines, compressor and air
recommended to use an oil-fog lubricator. If the
40