does not arrive at the air tool if the hose is longer.
quick coupling adaptor has to be connected to
the other end of the mini oil-fog lubricator. Add
small screw of the mini oil-fog lubricator.
Hose up to 5m
Hose up to 10m
Once a min
If it is not intended to use an oiler, put a few drops
tool for a long period.
WD WE
WC
WB
WA
A. Air Tool
B. Quick Coupling Adaptor
C.
sides
D. Quick Coupling Adaptor
E. Quick Coupling
F. Valve
G. Oil-fog Lubricator
H. Pressure Regulator
I. Filter Unit
J. Air Source (Compressor)
1 drop
1 drop
WG
WI
WF
WH
WJ
Air Volume/Air Pressure
Run the air impact wrench with a pressure of
6.2 bar (90 psi), use a compressor with an air
using higher pressure than maximum allowed
pressure of 7 bar, its life span will be reduced
l/min.
The air hoses should have an inner diameter
when using a 10m long hose with an inner
diameter of 9mm.
Storage
into the intended slots.
The tool has to be stored in a dirt- and dust-free
degrees Celsius.
www.DeubaXXL.de
12