Sony HT-CT260 Manual De Instrucciones página 34

C, X,
x, c,
1
Press AMP MENU to turn on the
AMP menu.
2
Press C/X/x/c repeatedly to
select the item and press
decide the setting.
3
Press AMP MENU to turn off the
AMP menu.
Setting the signal level
of the center or
subwoofer (CNT LVL,
SW LVL)
The sound from the center is output from
the left and right speakers on the Sound
Bar.
You can adjust the level and the balance
of the center and subwoofer. The
parameters of "CNT LVL" and "SW
LVL" range from "–6" to "+6" in 1-step
increments.
• CNT LVL: Adjusts the center level.
• SW LVL: Adjusts the subwoofer
level.
Enjoying Dolby Digital
sound at low volume
(DRC)
Compresses the dynamic range of the
sound track. Useful for enjoying movies
34
US
at low volume. DRC applies to Dolby
Digital sources.
• ON:
AMP
MENU • OFF:
Adjusting the bass and
treble level (BASS,
TREBLE)
You can adjust the bass and treble level.
to
The parameters of "BASS" and
"TREBLE" range from "–6" to "+6" in
1-step increments.
• BASS:
• TREBLE: Adjusts the treble level.
Adjusting the delay
between the sound and
the image (SYNC)
You can delay the sound using this
function when the image is slower than
the sound.
• ON: Adjusts the difference between
• OFF: No adjustment.
Note
• You may not be able to adjust the delay
between sound and image perfectly using
this function.
Enjoying multiplex
broadcast sound (DUAL)
You can enjoy multiplex broadcast
sound when the system receives a Dolby
Digital multiplex broadcast signal.
Compresses the sound in
accordance with the
information contained in the
content.
Sound is not compressed.
Adjusts the bass level.
picture and sound.