Bibby Scientific stuart Microfuge SCF2 Instrucciones De Funcionamiento página 2

English
Microfuge
SCF2
Instructions for use
Introduction
Thank you for purchasing this piece of Stuart
equipment. To get the best performance from the
equipment and for your own safety, please read
these instructions carefully before use. Before
discarding the packaging check that all parts are
present and correct.
This equipment is designed to operate under the
following conditions:
For indoor use only

 Use in a well ventilated area
 Ambient temperature range +5ºC to +40ºC
 Altitude to 2000m
 Relative humidity not exceeding 80%
Mains supply fluctuation not exceeding 10%

 Over-voltage category II IEC60364-4-443
Pollution degree 2

If the equipment is not used in the manner
described in this manual and with accessories
other than those recommended by Stuart, the
protection provided may be impaired and may
cause injury to the user.