Tabla de contenido
Publicidad
Total data entry
You can enter TOTAL ODO (miles) and TOTAL times
SET
from your previous computer.
Note – This step is not necessary if previous data from
TOTAL ODO
another computer is not desired (skip to step 9).
7. Enter TOTAL ODO (miles)
• Press MODE button until TOTAL ODO is displayed.
• Press SET button briefly and the first digit will flash.
• Press RESET button to change each digit.
• Press MODE button to advance to next number.
• Repeat until desired number is entered.
SET
• Confirm by pressing the SET button briefly.
TOTAL ODO
8. Enter Total time
00. 0 00
• Press MODE button until TOTAL TIME is displayed
• Press SET button briefly and the first digit will flash.
• Press RESET button to change each digit.
• Press MODE button to advance to next number.
• Repeat until desired number is entered
MODE
• Confirm by pressing the SET button briefly.
All manuals and user guides at all-guides.com
Valeurs totales / Datos totales
7. Distance totale
8. Temps total
• Réglage identique à la circonférence de la roue. Ici, vous
7. Km totales
8. Tiempo total
• Introducción como en las dimensiones de la rueda. Aquí se
pouvez transférer la distance totale, par exemple lors de
l'achat de cet appareil, à partir d'un autre compteur cycle.
puede transferir el número total de km p.ej. en caso de
compra del aparato de otro ordenador de bicicleta.
1
2
3 ... 0
SET
TOTAL ODO
00.
2
00
SET
TOTAL ODO
00.
2
00
Publicidad
Tabla de contenido
