Quick Start - NEC MultiSync XP Serie Manual Del Usuario

Quick start

Quick start
The following chart summarises the connection process for the
MultiSync XP17/XP21 monitor.
For more details please turn to the following pages if you are connecting
to an IBM compatible, Macintosh or compatible or other system.
Is the BNC Input being used?
No
Set the BNC/D-SUB switch to
the down (push in) position
Is your computer a Macintosh
computer?
No
Set the Sync. Switch to the ON
position.
Attach the Multicable or BNC Cable to
the to the video board. first and then to
the monitor
Connect the power cord of the moni-
tor to the power outlet and to the mo-
nitor itself.
Turn the monitor and computer on.
If necessary, use the OSM controls
for personal preference of the image.
Is the image correct?
Yes
Enjoy your monitor.
Set the BNC/D-SUB switch to the
Yes
up (raised) position
Is your computer a Powerbook, LC,
Yes
AV, PowerMac or Quadra 605?
Yes
Set the Sync. Switch to the OFF
No See the Trouble Shooting section
Problem solved?
Yes
Call your NEC-Dealer
No
position.
No
E-9