NEC MultiSync XP Serie Manual Del Usuario página 26

OSM Menus
Color Control Menu
Preset (Setting): Selects the desired colour setting.
The bar is replaced by the colour setting choice (from 1 to 5). Each
colour setting is adjusted at the factory to the stated degree Kelvin. If a
setting is adjusted, the name of the setting will change from degree
Kelvin to Custom.
Color Gain Red, Green, Blue: Increases or decreases red, green or
blue depending upon which is selected. The change in colour will
appear on screen and the direction (increase or decrease) will be shown
by the colour bars. One colour is always used as the reference colour
and therefore will not changed when adjusted. Your adjustments are
automatically saved instantly.
While in the Color Control Menu, the buttons on the front of the
monitor work as follows:
exit: exits to the main menu.
control up/down: moves the highlighted area up/down to select one of
the choices.
control +/-: moves the bar in the + or - direction to increase or decrease
the adjustment or selects the colour setting (1 through 5).
proceed: moves the highlighted area down to select one of the choices.
reset: resets the current Color Preset to the factory setting.
Note: a warning window will allow you to choose to reset the current
control or to cancel reset of the current control.
Color Control
Preset:
1 2 3
Color Gain:
Red
Green
Blue
4 5
E-21