Ferm CRM1054 Traducción Del Manual Original página 12

NOTE: Many inflatables have an internal flap
that prevents air loss during inflation, especially
air mattresses. Unless this flap is displaced by
the nozzle the inflatable will not inflate. Push the
nozzle firmly into the valve to make sure that you
push this flap out of the way.
WARNING: Risk of Bursting. Excessive air
pressure may cause a hazardous risk of bursting
or personal injury. Check the manufacturer's
maximum pressure rating for items being inflated.
For some valves you need a different size
connector than the standard size on the low
pressure hose:
• Place the adapter that is connected to the low
pressure hose (11) on to the end of the hose.
• Choose between the Large, Medium or small
connectors (13).
• Check the fit before attaching it to the low
pressure hose (11).
• Attach the chosen connector by pushing it on
the low pressure hose.
Deflate
Connecting the low pressure hose to the
compressor
Fig. H2
1. Remove the low pressure hose (11) from the
storage (12).
2. Push the hose into the deflate connection (25)
3. Insert the hose into the object being deflated,
using the correct adapter
Setting the Automatic Shut-Off Pressure
During use of the low pressure mode it is not
possible to use Automatic shut-off pressure.
Worklight (4)
Fig. E
Note: While the battery is assembled on the
machine and the machine
is in sleep state, the LEDs will not turn on.
• In order to switch on the machine, press the
Pressure selector (21) and the display (28) will
go on.
• Turn on the worklight by pressing the worklight
switch (26)
• Turn off the worklight by pressing the worklight
switch (26)
12
4. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Do not throw batteries in household waste!
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
FERM products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date
of original purchase. Should the product develop
any failure during this period due to defective
material and/or workmanship then contact your
FERM dealer directly.
The following circumstances are excluded from
this guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
• Normal wear and tear.