Precautions; Lens Care - Panasonic Lumix H-VS014140 Instrucciones De Operación

Ocultar thumbs Ver también para Lumix H-VS014140:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
H-VS014140E-VQT2C39.book 4 ページ 2009年3月12日 木曜日 午後4時3分

Precautions

∫Lens Care

≥ Sand and dust can damage the lens. Make
sure that no sand or dust gets inside the lens
or the terminals when using the lens on a
beach, etc.
≥ This lens is not waterproof. If drops of water
get onto the lens, wipe the lens with a dry
cloth.
≥ Do not press the lens with excessive force.
≥ When there is dirt (water, oil, and fingerprints, etc.)
on the surface of the lens, the picture may be
affected. Lightly wipe the surface of the lens with a
soft, dry cloth before and after taking pictures.
≥ Do not place the lens mount facing downwards.
Do not allow the lens contact point 1 to become
dirty.
All manuals and user guides at all-guides.com
∫ About Condensation (Fogging of the
≥ Condensation occurs when there are differences
≥ Put the camera into a plastic bag to allow it to
Lens)
in temperature and humidity as described below.
Condensation can cause the lens to become dirty
and lead to mold and malfunctioning, so exercise
caution in the following situations:
– When the camera is brought indoors from outside
during cold weather
– When the camera is brought into an air-
conditioned car
– When cold air from an air conditioner is directly
blown onto the lens
– In humid places
acclimatise to the surrounding temperature in
order to prevent condensation. If condensation
occurs, turn the power off and leave it for about
two hours. Once the camera acclimatises to the

Publicidad

Tabla de contenido
loading

Tabla de contenido