Bellman & Symfon BE1431 Manual Del Usuario página 64

All manuals and user guides at all-guides.com
Advanced testing
Testing the telephone transmitter is easy. First, make sure that the telephone
transmitter is installed properly. For instructions, read the section Installation.
Using the test button
Press both test buttons simultaneously.
1 The transmitter's LED lights up to show that a radio signal is being transmitted.
2 The Visit receiver' s telephone symbol lights up to show that the signal was received.
If you have customized the signal, it will react accordingly. See tables on page 67-70.
Using a telephone or a connected accessory
Activate the telephone transmitter using the telephone or any of the accessories.
1 The transmitter's LED lights up to show that a radio signal is being transmitted
2 The Visit receiver' s telephone symbol lights up to show that the signal was received.
If you have customized the signal, it will react accordingly. See tables on page 67-70.
If it doesn't work as described above, read the section Trouble shooting.
63
BE1431_049MAN004.indb 7 2015/2/11 10:26:46