Training Session; After Your Training Session; Cleaning & Storage; Emc - TensCare Eva Manual Del Usuario

12.4. TRAINING SESSION

1) Press and hold the POWER button
on the control unit for 3 to 5 seconds
to switch the control unit on.
2) When switched on for the first time,
the Eva will automatically select the
programme FACE 1. Next time, it will
automatically select the programme
you were using the last time it was
switched off.
3) You can select from the 8 preset
programmes. Details in section 8 will
help you identify the best programme
to suit you.
4) Identify the correct pads positioning
for the selected area and apply the
electrode pads as described in
section 9.3.
5) Once the electrode
correctly positioned,
intensity with the buttons CH1▼,
CH1▲, CH2▼ and CH2▲. The LCD
display shows
intensity used for each channel.
Note: If the sensation becomes
uncomfortable,
intensity.
12.5. AFTER YOUR TRAINING
SESSION
When the timer reaches zero, your
session is complete and the unit turns
off.
1) Check that the control unit is OFF. If
it is not, hold down the POWER
button to switch off then remove the
electrode pads from your skin by
holding the pad itself and gently
pulling. Be careful not to pull the
wires as this may damage them.
pads are
adjust the
the strength of
reduce the
2) Replace the electrode pads to their
protective plastic shield and return
them to the re-sealable plastic bag.
Note: When
electrode pads, DO NOT PULL
ON LEAD WIRES.
13. CLEANING &
STORAGE
Clean the case and lead wires at least
once a week by wiping with a damp
cloth and a solution of mild soap and
water. Wipe dry.
• Do not immerse your Eva unit in
water.
• Do not use any other cleaning
solution than soap and water.
Storage life
• Storage life of an unopened pack of
self-adhesive electrode pads is 2
years. This may be affected by very
high temperatures or very low
humidity.
• The unit has no fixed shelf life.

14. EMC

Wireless communications equipment
such as wireless
devices, mobile
telephones and their base stations,
walkie-talkies can affect this equipment
and should be kept at least a distance d
= 3,3 m away from the equipment.
(Note. As indicated in Table 6 of IEC
60601-1-2:2007 for ME EQUIPMENT,
a typical cell phone with a maximum
29
removing the
home network
phones, cordless