ENG
Below the procedure for mounting of sides and lid of the ceramic stove ANGELINE ALMA, AMBRE, ANNA:
1) Insert first lateral in ceramics
leaving
from
the
respecting the following passages:
4) Push the panels in ceramics
towards the low being verified that
joints in two irons of implantation.
7) Insert all the 4 lateral in
ceramics being repeated passages
from point 2 to point 6.
2) Insert the lateral ones before in
low
and
the posterior guide of stews...
5) Remove two silicone rubber
from the packaging ...
8) Repeat the passages from
point 1 to point 7 also for the other
side of stews.
PELLET STOVES
3) Then to insert the lateral ones
in the front guide of stews...
6) Paste the rubber at either end
of the lateral ceramic.
9) ) Place the top cover inserting
the two posterior hinges in the
holes previewed on mounting of
stews.
(Rev. 15/10/2013)