Bluetooth Telephone; Basic Operations; Phone Menu - Pioneer DEH-X8750BT Manual De Instrucciones

Menu Item Description
Pin code input Change the PIN code.
1 Press the M.C. dial to display the setting mode.
2 Turn the M.C. dial to select a number.
3 Press the M.C. dial to move the cursor to the next position.
4 After inputting the PIN code, press and hold the M.C. dial.
After inputting the PIN code, pressing the M.C. dial returns you
to the PIN code input display, and you can change the PIN code.
Device INFO Switch the device information on the display between the
device name and Bluetooth device address.
Guest Mode Select [ON] to move to the [Delete device] screen automatically
when the unit has already been paired with three devices.
[ON], [OFF]
Auto pairing Select [ON] to pair the unit and iPhone automatically when an
iPhone is connected to the unit via USB. (This function may not
[ON], [OFF]
be available depending on the version of iOS you are using.)

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 9). Up to two
Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears then a phone menu will be
displayed. To switch to another phone, press
2
Turn the M.C. dial to select [Missed calls], [Dialled calls], [Received calls] or
[PhoneBook], then press to confirm.
3
Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1
Press when a call is received.
10
En
again.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the current call.

Basic operations

Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current caller Press the M.C. dial.
and a caller on hold
Cancel a caller on hold Press and hold
Adjust the volume of the caller's Turn the M.C. dial during the call.
voice (When private mode is on,
this function is not available.)
Turn the privacy mode on or off Press BAND/
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold the M.C. dial to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.

Phone menu

Menu Item Description
Missed calls Display the missed call history.
Dialled calls Display the dialed call history.
Received calls Display the received call history.
.
when a call is received.
.
during the call.
.