Canceling The Demonstration Display (Demo Off); Setup Settings; Radio; Receiving Preset Stations - Pioneer DEH-X8750BT Manual De Instrucciones

4
Press the M.C. dial to confirm the settings.
NOTES
• You can cancel the menu setting by pressing SRC/OFF.
• These settings can be made at any time from SYSTEM settings (page 14) and SETUP settings (page 6).

Canceling the demonstration display (DEMO OFF)

1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [SYSTEM], then press to confirm.
3
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4
Turn the M.C. dial to select [YES], then press to confirm.

SETUP settings

1
Press and hold SRC/OFF until the unit turns off.
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [SETUP], then press to confirm.
4
Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item Description
FM step Select the FM tuning step from 100 kHz or 50 kHz.
[100kHz], [50kHz]
AM step Select the AM tuning step from 10 kHz or 9 kHz.
[10kHz], [9kHz]
S/W control Select when there is a full-range speaker connected to the rear
speaker output leads.
[Rear SP:F.Range]
[Rear SP:S/W] Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
S/W UPDATE Select to update the unit to the latest Bluetooth software. For
details on Bluetooth software and updating, visit our website.
NOTES
• Even if you change [S/W control], there will be no output unless you turn the subwoofer output on.
Refer to [Subwoofer1] (page 14).
6
En
• If you change [S/W control], subwoofer output in the audio menu will return to the factory settings.
• Both rear speaker lead outputs and RCA rear output are switched simultaneously in [S/W control].

Radio

Receiving preset stations

1
Press SRC/OFF to select [Radio].
2
Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press and turn the M.C. dial to select a preset channel.
TIP
The LEVER can also be used to select a preset station when [Tuning Mode] is set to [Preset] in
FUNCTION settings (page 13).

Best stations memory (BSM)

The six strongest stations are stored on the preset channels.
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, Turn LEVER to select a station.
Turn and hold LEVER then release to seek an available station. Scanning stops when
the unit receives a station. To cancel seek tuning, turn LEVER.
NOTE
[Tuning Mode] needs to be set to [Manual] in the FUNCTION settings (page 13).
To store stations manually
1
While receiving the station you want to store, press
select a preset channel.
2
Press and hold the M.C. dial.
and turn the M.C. dial to