Audio Settings; Entertainment Settings; System Settings - Pioneer DEH-X8750BT Manual De Instrucciones

AUDIO settings

Menu Item
Fader/Balance
Preset EQ
[SuperBass], [Powerful], [Natural],
[Vocal], [Custom1], [Custom2],
[Flat]
G. EQ
Select an equalizer band and
level for further customizing.
Equalizer band: [100Hz], [315Hz]
, [1.25kHz], [3.15kHz], [8kHz]
Equalizer level: [+6] to [–6]
Loudness
[OFF], [Low], [Mid], [High]
Subwoofer1
[Normal], [Reverse], [OFF]
Subwoofer2
Cut-off frequency: [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
Output level: [–24] to [+6]
Bass Booster
[0] to [+6]
HPF
Cut-off frequency: [OFF], [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
SLA
[+4] to [–4]
14
En
Description
Adjust the front/rear or left/right speaker
balance.
Select the preset equalizer curve.
Customize the equalizer curve.
[Custom1] can be set separately for each source.
However, each of the below combinations are set
to the same setting automatically.
• USB, iPod, and App (iPhone)
• BT Audio, and App (Android)
[Custom2] is a shared setting used for all sources.
Compensate for clear sound at low volume.
Select the subwoofer phase.
Only frequencies lower than those in the
selected range are output from the subwoofer.
Select the bass boost level.
Only frequencies higher than the high-pass filter
(HPF) cutoff are output from the speakers.
Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• USB, iPod, and App (iPhone)
• BT Audio, and App (Android)

ENTERTAINMENT settings

You can enjoy various entertainment displays while listening to each sound source.
Select a display type from [Simple display], [spectrum analyzer], [level indicator] or
[calendar].
NOTE
When Radio or AUX is selected as a source, the simple display will appear even if spectrum analyzer or
level indicator is set.

SYSTEM settings

You can also access these menus when the unit is turned off.
Menu Item
Language select
[English], [Español], [Português]
Calendar
Clock Setting
EngineTime alert
[OFF], [15Minutes], [30Minutes]
Clock
[ON], [Elapsed time], [OFF]
Auto PI
[ON], [OFF]
Warning tone
[ON], [OFF]
Description
Select the language to display the text
information from a compressed audio file.
Set the date.
Set the clock and select the time notation
(page 5).
Display how much time has elapsed since the
vehicle was turned on.
Set the clock or the elapsed time to display even
if the unit is turned off.
Search for a different station with the same
programming, even if using a preset station.
A beep can be heard when the front panel is not
detached from the head unit within four seconds
of turning off the ignition. Select [OFF] to disable
this function.