Product Characteristics - LUND 68090 Manual Del Usuario

All manuals and user guides at all-guides.com
GB

PRODUCT CHARACTERISTICS

The garment steamer is a specifi c type of iron, which thanks to the soleplate caps can also be used for ironing fabrics, including
clothing, using a steam jet. Proper, reliable and safe operation of the product depends on appropriate use, that is why you should:
Read and keep the entire manual before the fi rst use of the product.
The supplier shall not be held liable for any damage or injury resulting from improper use of the product, failure to observe the
safety regulations and recommendations of this manual. Use of the product for purposes other than those for which it was inten-
ded shall cause the loss of the user's rights to the guarantee and under warranty.
ACCESSORIES
The product is supplied complete and does not require assembly. The product is supplied with two soleplate caps and a base for
storing the product during work breaks.
GENERAL INSTRUCTIONS FOR USE
The appliance has been designed for home use and is not allowed to be used in commer-
cial applications.The appliance heats up to a high temperature during use. Be careful when
operating the appliance. Improper use of the appliance may result in serious burns and/or
fi re. Do not leave the appliance unattended when it is connected to a power supply. Do not
use the appliance for any other purpose than ironing fabrics, e.g. for heating or defrosting. It
is forbidden to repair, disassemble or modify the appliance on one's own. All repairs must be
carried out by an authorised service centre.The product is not intended for use by children
under at least 8 years of age and by persons with reduced physical and mental abilities and
by persons without experience in or understanding of the operation of the product. Unless
they will be supervised or instructed to use the product safely, in a manner ensuring that the
risks involved are understood. Children should not play with the product. Unattended children
should not be allowed to perform the cleaning and maintenance of the appliance. Keep the
appliance and the power cord out of reach of children under 8 years of age while the appli-
ance is connected to the power supply or cooling down.
Recommendations for connecting the appliance to the power supply
Before connecting the appliance to the power supply, make sure that the voltage, frequency,
and performance of the power supply correspond to the values shown on the appliance's
rating plate. The plug must fi t into the socket. It is forbidden to modify the plug or socket in
any way for the purpose of fi tting.The appliance must be connected directly to a single power
supply socket. The mains supply circuit shall be equipped with a protective conductor and a
protective device of at least 16 A. When using extension cords, use an extension cord with
three wires that can withstand a 16 A current load. Avoid contact of the power cord with sharp
edges, hot objects or surfaces, including the appliance's soleplate. During operation, the
power cord must always be fully extended and the position of the power cord must be set
so that it does not become an obstacle during product operation. The power cord should not
be placed in a manner that would pose a risk of tripping. The power supply socket should be
located in a place where it is always possible to quickly remove the product power cord plug.
Always pull the power cord by the plug housing when unplugging it, never by the cord. If the
O R I G I N A L I N S T R U C T I O N S
10