Technical Data - LUND 68090 Manual Del Usuario

To straighten extremely stubborn creases, dampen the creases, e.g. with a sprayer (sold separately). When dampening the fabric,
do not point the water jet at the steamer.
It is recommended to iron on ironing boards and to use steamer power cord holders if the board is equipped with such. The holder
should be positioned so that the risk of the power cord coming into contact with the hot steamer's soleplate is minimised.
Special care should be taken when ironing synthetic fabrics. Check the product label to see if ironing is allowed at all and at what
temperature. For particularly delicate fabrics, a slightly dampened, thin cotton fabric can be used as an intermediate layer between
the steamer's soleplate and the synthetic fabric.
Steamer maintenance
Check the steamer's soleplate after each use. Allow the soleplate to cool down completely before cleaning. Clean the soleplate
with a slightly damp, soft cotton cloth. Protect the soleplate from scratches and do not use any chemicals such as dishwashing
liquids, alcohol, acids, solvents, etc. for cleaning. Do not use sharp tools, hard sponges, scrapers, etc. to clean the soleplate so
as not to scratch its surface.
Use a soft, slightly damp cloth to clean the remaining parts of the steamer.
If the fabric sticks to the steamer's soleplate during ironing, stop ironing immediately, disconnect the steamer from the power
supply and remove any remaining fabric from the appliance's soleplate as soon as possible using a damp, soft cotton cloth. The
cleaning operation should be carried out with gloves which provide protection against the high temperature of the steamer's
soleplate.
Never immerse the steamer in water or any other liquid.
Steamer storage
Store the steamer in a dry place, disconnected from the power supply. The power cord must be unplugged from the socket. Store
the steamer with the water tank emptied. Store in a dark and well-ventilated place. The place of storage should prevent access by
children. Store the steamer so that the appliance, and especially its soleplate, is not damaged. If the power cord is rolled up for
storage, fully unwind the power cord before plugging the power cord into a socket.

TECHNICAL DATA

Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Insulation class
Net weight (cover)
Water tank capacity
Steam generation
O R I G I N A L
All manuals and user guides at all-guides.com
GB
Unit
[V~]
[Hz]
[W]
[kg]
[ml]
[g/min]
I N S T R U C T I O N S
Value
68090
220 - 240
50 - 60
900 - 1100
I
0.47
100
10
13