Register/ De-Register A Handset; Removing A Handset - Daewoo International DTD-1200 Manual Del Usuario

9. Register / De-register a Handset
9.1 Register to a DECT base
You can register 5 handsets to one base unit. By default, a handset is
registered as handset 1 on a base unit upon delivery (base unit 1). You
only need to register a handset if:
§ The handset registration has been removed from the base unit.
(e.g. for re-initialization)
§ If you want to subscribe a different handset to this base unit.
1. Press
and press
2. Use scroll key to select the number of the base unit you would like
to register the handset to (1-4). The unit ask for the PIN code (4
digits, default one is 0000), then the display will show PRESS
BASE , now you need to disconnet the power plug of from the
base station and reconnect it. After this the base station will be in
registration mode for three minutes.
3. When the handset is registered, it will show HS followed by the
handset number.

9.2 Removing a handset

1. You can remove a handset from a base to allow another handset
to be registered:
2. Press
REGISTER and press
3. Enter the pin code 0000 and press
4. Enter the handset number (1-5) you want to remove and press
key. The unit will go back to Menu, the removal is done.
5. If not, it will ask again to enter the handset number.
All manuals and user guides at all-guides.com
key. Use or
key.
key. Use
keys to scroll to REGISTER
or keys to scroll to DE-
key.
key.
16