Command Table - Behringer WASP DELUXE Guia De Inicio Rapido

WASP DELUXE System Exclusive Commands
Some parameters in the WASP DELUXE synthesizer can be
changed using MIDI system exclusive (SysEx) commands.
A MIDI utility such as the popular MIDI OX can be used to send the
SysEx command data string to the WASP DELUXE using the USB
MIDI conection between a host computer and the WASP DELUXE.
SysEx Data Format
The following data format is used when creating a SysEx message
(with the data beginning with F0 and ending with F7).
F0 00 20 32 aa bb cc dd ee ff F7
The various items in this SysEx data string are described below:
Item Description
SysEx
Manufacturer
00 20 32
(Behringer GmbH)
aa Reserved
Device ID: 00-0xF (must match hardware
device ID), or 7F to address all devices.
bb
Note: This is the same as the Poly Chain ID.
It is not the MIDI Channel
Main parameter number
cc
(see Command Table below)
Sub parameter number
dd
(see Command Table below)
Parameter value MSB (will be zero unless the
ee
parameter value is greater than 127)
Parameter value LSB (Range is 0 to 127)
ff
(see Command Table below)

Command Table

cc (Main) dd
ID number
Global
Setting
Description
(Sub)
00 MIDI Channel
Key Priority
(In poly chain mode,
01
note priority will be
restricted to 'LOW')
02 Multi Trigger
Pitch Bend
semitones
(Pitch wheel range)
Effective when pitch
03
bend range not
fixed. See "OC Pitch
bend mode" below
0xA
06 MIDI IN Transpose
07 MIDI Note Zero Volts 0 to 127
Poly Chain*
08
see note below
Device ID
09
(Poly Chain ID)
Enable/Disable MIDI
0A
Channel Switches
0B Modulation Curve
OC Pitch Bend Mode
OD Poly Chain Style
Restore Global
0xB
Settings
Start User Pitch
0xE
CV Calibration
Restore Default
0xF
CV Calibration
45
Quick Start Guide
ff (Para Default
Range)
0 to 15 0
0-LOW
1-HIGH
0- LOW
2-LAST
0-OFF
1-ON
(1.05 style) 0- OFF
2-ON
(1.06 style)
0 to 12 12
0 to 24
The range is
-12 to + 12,
12
so 12 is no
transpose
36
0-OFF, 1-ON 0- OFF
0-15 0
0- Enable
0-Enable
1- Disable
0- Soft
1- Med 0- Soft
2- Hard
0- PitchBend
Range Fixed
1- PitchBend 0- Fixed
Range
Settable
0- New Style 0- New
1- Old Style Style