Connecting The Water Supply Hose; Drain Hose; Quick Start - Kunft KWM5316 Manual De Instrucciones

3. Adjust the legs and lock them with a spanner and make sure the
washing machine is steady.

Connecting the water supply hose

Warning!
• To prevent leakage or water damage, follow these instructions!
• Do not kink, crush, modify or sever the water inlet hose.
• For the model equipped with a hot valve, connect it to hot water
tap with hot water supply hose. Energy consumption will decrease
automatically for some programmes.
Connect the inlet pipe as indicated. There are two ways to connect
the inlet pipe.
1. Connection between ordinary tap and inlet hose.
Loosen the clamp nut and tighten the clamp nut's four bolts. Press
the slide bushing and then connection it by inserting the inlet hose
into the connecting base
2. Connection between screw tap and inlet hose.
Tap with threads and inlet hose Special tap for washing machine
Connect the other end of inlet pipe to the inlet valve at the back of the
washing machine and fasten the pipe tightly clockwise.
water inlet valve water supply hose
14
washing machine

Drain Hose

Warning!
• Do not kink or protract the drain hose.
• Position the drain hose properly, otherwise damage might result
due to water leakage.
There are two ways to place the end of drain hose:
1. Put it into the water trough
Note!
• If the machine has a drain hose support, please install it as follows.
Warning!
• When installing the drain hose, fix it properly with a rope.
• If the drain hose is too long, do not force it into the washing machine
as it will cause abnormal noises.

Quick Start

Caution!
• Before using the washing machine, please make sure it's installed
properly.
• Before using the washing machine for the first time, run it for one
cycle without the clothes inside.
EN
KWM5316
2. Connect it to the branch
drainpipe of the trough.
15