WONDERFOLD W2S 2.0 Instrucciones De Ensamblaje página 10

Handle Strap Assembly
1. Locate the handle strap in the zippered front stroller
storage pocket.
2. Fix the handle strap onto the lower front frame tube.
3. Use as shown in diagram 3.
EN
Seat Assembly
(Seat is not suitable for children under 6 months.)
1. Place the seat into one end of the stroller.
2. Secure the hooks on both sides of the seat onto the stroller frame hand rail. Then
secure the hooks on the back of the seat onto the upper tube of the stroller frame.
3. Completed seat assembly shown in diagram 3.
4. For reclining mode, remove the seat and reposition the side hooks further forward.
6
Reclining Mode
Seat Mode
Operation
Securing the Harness
1. With harness unbuckled, place child in seat.
2. Secure child with harness by placing shoulder and waist belts over shoulders and
over thighs. Snap buckle tongues into center strap buckle.
3. Snugly adjust each strap by pulling on the free end of the strap and moving the
slide adjuster along strap.
Shoulder Belts
Waist Belts
Center Strap
Parking Brake Operation
1. Step down gently on the parking brake pedal to lock. To test and ensure the brake is
engaged, try to push the stroller forward.
2. Lift the parking brake pedal upwards with your foot to release it.
Handle Height Adjustment
1. Press the adjustable handle button on both sides simultaneously.
2. While the buttons are pressed, position the handle up or down to desired height.
EN
①
②
④
③
7