Mounting And Installing; Wall Version - FHF FernTel3 Instrucciones De Manejo

Mounting and installing

Wall version

Fasten the telephone mount with 4 screws (2). Place the provided washers Ø 18 mm under
the screw head.
Bore
illustration
(not to scale)
Place the telephone in the upper latches (A), swing it downwards until the lower latches
audibly engage (B).
Remove the keypad plate (6), and tighten the two locking screws (3) as far as they will go.
Important: This preserves the IP65 degree of protection.
Pull the telephone line through the cable gland (4) and connect it with terminal (5) TCP/La -
TCP/Lb (TCP : Terminal Connection Point).
In case of factory fitted cable glands the attached operating instructions have to be
considered.
9