Program Pause Following The Exchange Code; Program The Enquiry Key (Flash Time); Restore To As-Delivered Condition - FHF FernTel3 Instrucciones De Manejo

Program the pause following the exchange code
- Lift the handset.
- Press the * and # keys simultaneously.
- Press key 1.
- Press a key from 1 to 5 (the key number corresponds to the duration in seconds)
- Press the
- Replace the handset.

Program the Enquiry Key (flash time)

For dual-tone multifrequency only. Pressing the enquiry key briefly interrupts the loop to the
private branch exchange (flash) to enable an enquiry to another private branch connection.
The flash time is programmable.
- Lift the handset.
- Press the * and # keys simultaneously.
- Press key 8.
- Enter the code for the desired flash time.
- Press the
- Replace the handset.
Code / Key Flash time
1 80 ms
2 120 ms
3 600 ms

Restore to as-delivered condition

- Lift the handset.
- Press the * and # keys simultaneously.
- Press key 3.
- Press the
- Replace the handset.
Upon „Resetting to the as-delivered condition" the PIN is not reset to 0000.
20
key to store the entered duration of the pause.
(1...5)
key to store the selected flash time.
(1, 2, 3)
key to reset the as-delivered condition.
Comment
As-delivered condition