Operation And Programming; Version With Keypad (21 Keys) And Display; Operation; Seize (Make / Answer A Call) - FHF FernTel3 Instrucciones De Manejo

Operation and programming

Version with keypad (21 keys) and display

Operation

Seize (Make / answer a call)

When you pick up the handset, you may answer a call or make a call to a conversation
partner.

Receiver volume

During a call you can adjust the volume in the receiver for the duration of the call, using the
keys and . If you want to change the receiver volume permanently, please use the
programming menu „Settings/Receiver volume"

Make a call

Dial the desired number by using the number keys. When using the dialling mode Pulse
dialling, the asterisk and hash keys have no function.
Speed code dialling
By pressing the key, a pre-programmed number can be dialled automatically.
Short code dialling
One of 12 pre-programmed telephone numbers can be automatically dialled by pressing the
key and then pressing one of the number keys (0...9) or the asterisk key (*) or the pound
sign key (#).
You have to choose between Speed code dialling or Short code dialling. Select by programming
( Short / Speed code dialling Mode key). The as-delivered condition is Speed code dialling.
Last number redial
By pressing the last number redial key, the last entered number is automatically dialled.
Disconnect
To end a call and start a new call immediately afterwards, there is no need to put the handset
down, just press the disconnect key. When disconnecting, the old call ends, and after a short
while you hear the dialling tone. You may now enter the number for the new call.
Enquiry call (dual-tone multifrequency only)
If the telephone is connected to a private branch exchange, you may press the enquiry key R
in order to establish a connection with another subscriber, who is also connected to the
private branch exchange. By pressing this key a second time, you will be connected with the
first subscriber again.
Telephone book
You can dial numbers from the telephone book. Pick up the handset and press the key.
„Telephone book" appears in the display. If you press the key again, the first of the stored
names is shown. Using the keys and you can scroll to the name you want on the
display. If you press the key, the number associated with the displayed name is dialled.
(„Telephone book" appears in the display only if the telephone book contains one or more
entries.)
12