Descargar Imprimir esta página

SMC Networks SMC7004VBR Manual De Instalación Rápida página 17

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SMC7004VBR_QS.joint.qxd
19/9/02
2. In the TCP/IP dialog box, make sure that "Ethernet" is selected
in the "Connect Via:" field.
If "Using DHCP Server" is already selected in the "Configure:" field,
your computer is already configured for DHCP. Close the TCP/IP
dialog box, and skip to Step 2. Disable HTTP Proxy.
3. All the information that you need to record is on the "TCP/IP"
dialog box. Record these values in the space below step 5.
4. After writing down your IP settings, select "Using DHCP Server"
in the "Configure" field and close the window.
5. Another box will appear asking whether you want to save your
TCP/IP settings. Click "Save."
TCP/IP Configuration Setting
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Primary DNS Server
____.____.____.____
Secondary DNS Server
____.____.____.____
Default Gateway ____.____.____.____
12:43 pm
Page 33
Step 2. Disable HTTP Proxy
You will need to verify that the "HTTP Proxy" feature of your Web
browser is disabled. This is so that your Web browser will be able
to view the configuration pages inside your Barricade. The
following steps are for Internet Explorer and for Netscape.
Determine which browser you use and follow the appropriate steps.
Internet Explorer
1. Open Internet Explorer and click the stop button. Click "Edit"
and select "Preferences."
2. In the Internet Explorer Preferences window, under Network,
select Proxies.
3. Uncheck all checkboxes and click OK.

Publicidad

loading