Connecting Power; Power Over Ethernet (Poe) From The Lan - 3Com AP9552 Dual Band Manual Del Usuario

5) Slide the slider across to lock the AP to the bracket.

Connecting Power

This section describes how to power the AP in the following ways:
By Power over Ethernet (PoE) supplied over the LAN by an 802.3af PoE
compliant device such as a switch.
By PoE supplied by a PoE injector or midspan (not included with the AP).
: The PoE injector needs to be separately purchased.

Power over Ethernet (PoE) from the LAN

To power the AP using PoE provided by a switch or other 802.3af compliant device,
plug the network cable from the device into the AP's Ethernet port.
All manuals and user guides at all-guides.com
8