Technoline WS9480 Manual Del Usuario página 13

Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.
6. Thermometer
6.1 RF Transmission Procedure:
The main unit automatically starts receiving transmission from outdoor thermo sensor for outdoor

temperature & humidity after batteries inserted.
The outdoor sensor will automatically transmit temperature and humidity signal to the main unit

after batteries inserted.
If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after the

batteries inserted ("- - . –"display on the LCD), hold "SEARCH" button (B6) for 3 seconds to receive
transmission manually. RF icon "
6.2 Temperature & Humidity
(1) Past 24 Hours Maximum / Minimum Outdoor Temperature and Humidity
After start up, the unit automatically shows past 24 hours maximum outdoor temperature and

humidity record. "MAX" show on the LCD
After start up, the unit automatically shows past 24 hours minimum outdoor temperature and

humidity record. "MIN" show on the LCD.
(2) Recorded Maximum/Minimum Outdoor Temperature and Humidity from Start-up/Reset.
Press "MEM" button (B3) to view the maximum and minimum temperature and humidity record

from start-up or reset. "
When viewing the memory record, hold "MEM" button for 3 seconds to clear the maximum and

minimum record.
When viewing the memory record, press "MEM" button (B3) again to check the corresponded time

and date for memory maximum and minimum temperature & humidity record. The memory record
value and corresponded time and date flash. Press "MEM" button select to view:
Time & date for minimum temperature memory record, Time & date for minimum humidity
memory record, Time and date for maximum temperature memory record, Time and date for
maximum humidity memory record.
(3) Celsius / Fahrenheit
Press "°C /°F" button (B8) to select Indoor/Outdoor Temperature in Celsius mode or Fahrenheit

mode.
If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or HH.H

(beyond the maximum temperature) will be shown on the LCD.
(4) Humidity
The humidity measurable range is 20% ~ 99%. If the current humidity measurement is lower than

20%, the LCD would display
For past 24 hours or memory maximum or minimum temperature and humidity record. If the record

flashes on the LCD
"
" flash on the LCD.
.
EN4