Safety information
Electrical connection
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use
(splash-proof).
• Protect open plugs and sockets from moisture.
Safe operation
• Operate the unit only when there are no people in the water.
• Do not use the unit, if electrical lines or the housing are damaged.
• If a power connection cable is damaged, have it replaced immediately by OASE, an authorized
customer service or a qualified electrician to prevent electric shock.
• Do not carry or pull the unit by its power cable.
• Route lines so that they are protected from damage and nobody can trip over them.
• Never make technical modifications to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
• Should problems occur, please contact the authorized customer service or OASE.
Intended use
Only use the product described in this manual as follows:
• For pumping clear water or rain water.
• For pumping chlorinated water.
• For pumping dirty water containing particles max. 1.5 inch in size.
• For irrigating and watering.
• For transferring water from and draining basins or ponds/pools.
• For pumping the water out of rain barrels or cisterns.
• In compliance with the technical specifications.
The following restrictions apply to the unit:
• Not suitable for salt water.
• Not suitable for drinking water.
• Do not use for long-term operation (e.g. continuous recirculation of water in a pond).
• Do not use for industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
• Do not connect to the drinking water supply.
10