Install The Battery; Charge The Battery; Battery Charging - Druck DPI 620 Genii Manual Del Usuario

4. Install the Battery

1. Remove the five Pozidriv screws (A) (Ref: Fig 1, Rear View).
2. Remove the battery cover.
3. Check the connections on the battery line up with the connections in the battery
compartment.
4. Place the battery in the battery compartment.
5. Replace the battery cover.
6. Secure the cover with the five Pozidriv screws.

5. Charge the Battery

1. Connect the DC power supply/battery charger unit in to the +5V
the unit (Ref: Fig 2 Side View).
2. The battery can also be charged using the USB connections (Ref: Fig 2 Side View).
3. The unit can be On or Off when charging. Charging times maybe longer if charging when the
unit is On.

5.1 Battery Charging

6. Basic Modes
6.1 Power On
From OFF – press the power button (Ref: Fig 2, Side View) until the dashboard is displayed.
Copyright 2013 Baker Hughes Company.
2 | DPI 620G Safety Instructions–English
Figure 1: Rear View
Charging Connection
DC Power Supply
External Battery Charger
Mini USB Connection
connection on the side of
DC
Charge Time
6.5 Hours
6.5 Hours
13 Hours.