F1
F2
F3
[EBZ8000RH]
F4
[EBZ8000RH]
F4.1
F4.2
F4.3
English
Assembly
■ BLOWER TUBES
1. Connect the blower and swivel joint with
flexible hose. Clamp both ends of the
flexible hose securely with the hardware
supplied with the unit.
2. Align the protrusion and the groove
provided on the tube ends and twist the
tube until connection is locked up.
@ @ @ @ @ @ @ @ e ?
@ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e
@ @ @ @ @ @ @ @ e ?
@ @ h ?
@ @ h ?
@ @ h ?
@ @ h ?
@ @ h ?
@ @ h ?
@ @
@ @ @ @
@ @
@ @
NOTE
@ @
@ @ @ @
@ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @ @ @
@ @
A light lubricant may be used to ease
@ @
@ @ @ @
@ @ @ @
@ @ @ @
@ @
@ @ @ @
assembly of flexible pipe to blower
@ @
@ @
@ @
@ @
@ @
@ @ @ @
@ @ @ @
elbow.
@ @ @ @
@ @ g
@ @ g
@ @ g
@ @ g
@ @ g
@ @ g
@ @ @ @ @ @ @ @
? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @
? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @
■ THROTTLE LEVER [EBZ8000RH]
• Set up the clamp to the swivel and
tighten the screw on the clamp.
(1) Clamp
(2) Swivel
(3) Screw
■ THROTTLE CABLE [EBZ8000RH]
• Use the clamp to fasten the colgate
tube containing the throttle cable and
the power cable to the hose.
(1) Clamp
(2) Cable
(3) Hose
■ WAIST BELT
• The waist belt is attached to the rings
on the left and right sides of the frame.
• Be sure to always tighten the buckle in
front of your body.
WARNING
• If you are not using a waist belt, be
sure to remove it from the unit and
store it.
• There is a risk that the belt will be
caught, toppling the unit.
• There is a danger that the belt will be
sucked into the fan.
Español
Montaje
■ TUBOS DEL SOPLADOR
1. Conecte el soplador a la unión giratoria
con la manguera flexible. Asegure
ambos extremos de la manguera
flexible con las abrazaderas y demás
elementos proporcionados con el
aparato.
2. Alinee la parte saliente con la ranura
que hay en los extremos del tubo, y gire
el tubo hasta que la conexión quede
trabada.
@ @ @ @ @ @ @ @ e ?
@ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e
@ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @ e ?
@ @ h ?
@ @
@ @ h ?
@ @ @ @
@ @ h ?
@ @ h ?
@ @ @ @
@ @ h ?
@ @ h ?
@ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @
NOTA
@ @
@ @
@ @ @ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @
@ @ @ @
@ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @
Podrá usarse un lubricante liviano para
@ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @ @ @
@ @ @ @
facilitar la conexión del tubo flexible al
@ @ @ @
@ @
@ @
@ @
@ @
@ @ @ @
@ @
@ @
@ @
@ @ @ @
@ @ @ @
@ @ @ @
@ @ @ @
codo del soplador.
@ @ @ @
@ @
? @ @
@ @ g
? @ @
@ @ g
? @ @
@ @ g
? @ @
@ @ g
? @ @
@ @ g
? @ @
@ @ g
? @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @
? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @
? @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @
? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @ e ? @ @ @ @ @ @ @ @ ? e @ @ @ @ @ @ @ @
■ PALANCA DEL REGULADOR [EBZ8000RH]
• Instale la abrazadera a la unión
giratoria y apriete el tornillo en la
abrazadera.
(1) Abrazadera
(2) Unión giratoria
(3) Tornillo
■ CABLE DEL REGULADOR [EBZ8000RH]
• Utilice la abrazadera para atar con la
manguera el tubo de protección que
contiene el cable del gas y el cable del
motor.
(1) Abrazadera
(2) Cable
(3) Manguera
■ CORREA PARA LA CINTURA
• La correa para la cintura se fija a los
anillos en el lado derecho e izquierdo
del marco.
• Asegúrese siempre de apretar la hebilla
en frente a su cuerpo.
ADVERTENCIA
• Si no utiliza la correa para la cintura,
asegúrese de retirarla de la unidad y
guárdela.
• Existe el riesgo de que la correa
quede atrapada, haciendo caer la
unidad.
• Existe el peligro de que la correa sea
aspirada dentro del ventilador.
@ @ @ @ @ @ @ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @
@ @
@ @ @ @
@ @
@ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @
@ @ @ @
@ @
@ @ @ @
@ @ @ @
@ @
? @ @
? @ @
? @ @
? @ @
? @ @
? @ @
? @ @ @ @ @ @ @ @
? @ @ @ @ @ @ @ @
15