Tripp-Lite PDUMV15C Manual Del Propietário página 5

Features
1 2
6
1
NEMA 5-15P Input Plug (Models PDUMV15 and PDUV15)
2
NEMA 5-15R Outlets (Models PDUMV15 and PDUV15)
3
NEMA L5-20P Input Plug (Models PDUMV20 and PDUV20)
4
NEMA 5-15/20R Outlets (Models PDUMV20 and PDUV20)
5
NEMA 5-20P Plug Adapter (Models PDUMV20 and PDUV20):
The adapter converts the input plug from NEMA L5-20P to NEMA 5-20P.
6
Circuit Breaker: If the current drawn by the equipment connected to the PDU
exceeds the Maximum Load Rating, the circuit breaker will trip to prevent possible
damage. When the circuit breaker trips, its plunger will pop up. Disconnect excess
equipment and allow the breaker to cool at least one minute before depressing the
plunger to reset the breaker.
7
Ammeter (Models PDUMV15 and PDUMV20 only): The total electrical current used
by the PDU will be displayed on the digital meter in amperes.
8
Illuminated Power Switch with Cover (Models PDUMV15 and PDUMV20 only)
9
Diagnostic Indicator Lights: The
three LEDs on the front panel show
current power conditions (from left to
right):
Protection Present (Green LED):
Indicates the surge-suppression components are intact and providing full protection
against spikes and surges. This LED should be lit anytime the PDU is plugged in and
power is present. If the Protection Present LED does not light, then some of the surge
suppression components are not functioning and the unit should be returned for
repair as soon as possible. You may still use the unit; however, connected equipment
will be protected from spikes and surges at a lesser level than normal.
Line Fault (Red LED)*: Indicates a wiring fault has been detected. If this LED
illuminates at any time while the unit is plugged in, the fault should be repaired by a
qualified electrician as soon as possible. This LED indicates that phases are
reversed, ground is missing or some other sort of wiring error exists in the circuit the
PDU is plugged into. The Line Fault detector circuitry will identify most common
wiring faults, but will not necessarily detect every possible type of fault.
3
4
7
8
PROTECTION
PRESENT
9
5
5
LINE
FAULT OK