Structure And Functions - Comet CPS 55 BT Manual

tery and the battery charger under control (read the
specific manual for more details).
• It should not be taken for granted that batte-
ries and battery chargers with the same technical
features as those we offer will produce the same
results. Only perfect compatibility between the-
se elements (Pb-Acid batteries, gel batteries and
battery chargers) will safeguard the performan-
ces, the service life, the safety and the economic
value invested.
Refer to the relevant manufacturer's manual provided.
4.2.

STRUCTURE AND FUNCTIONS

4.2.1. MACHINE
PHOTO A
1 BATTERY COMPARTMENT HOOD
2 RECOVERY WATER TANK
3 SOLUTION WATER TANK PLUG
4 SOLUTION WATER TANK
5 BRUSH MOTOR PROTECTIVE COVER
6 SPLASH GUARD
7 FRONT RIGHT BUMPER WHEEL
8 MACHINE RIGHT WHEEL
PHOTO B
1 CONTROL PANEL
2 GENERAL ON / OFF KEY SWITCH
3 SOLUTION WATER OUTLET ADJUSTING
LEVER
4 RECOVERY TANK DRAIN HOSE
5 SOLUTION WATER TANK DRAIN PLUG
6 BRUSH PLATE LIFT/LOWER PEDAL
7 RECOVERY TANK INSPECTION PLUG
8 SQUEEGEE LIFT/LOWER LEVER
9 BATTERY CHARGER CONNECTOR
10 FORWARD/REVERSE TRACTION LEVER
PHOTO C DC 24V MODEL WITH TRACTION
1 FORWARD/REVERSE LED INDICATORS
2 PUSH SWITCH FOR THE ADJUSTING OF
DRIVING SPEED
3 DRIVING SPEED LED INDICATORS
4 BRUSH MOTOR SWITCH
5 SUCTION MOTOR SWITCH
6 BATTERY POWER TEST
PHOTO D DC 24V MODEL WITH TRACTION
1 GENERAL ON / OFF KEY SWITCH
2 FORWARD/REVERSE TRACTION LEVER
2A FORWARD DRIVE
2B REVERSE DRIVE
3 HOUR METER
4 BRUSH MOTOR THERMAL BREAKER
5 TRACTION MOTOR THERMAL BREAKER
6 SOLUTION WATER OUTLET ADJUSTING
LEVER
7 RECOVERY TANK DRAIN HOSE
8 BATTERY CHARGER CONNECTOR
SQUEEGEE LIFT/LOWER LEVER
PHOTO E DC 24V MODEL WITHOUT TRACTION
1 BRUSH MOTOR SWITCH
2 SUCTION MOTOR SWITCH
3 BATTERY POWER TEST
PHOTO F AC 230V MODEL
1 GENERAL ON/OFF SWITCH
2 BRUSH MOTOR SWITCH
3 SUCTION MOTOR SWITCH
PHOTO G DC 24V MODEL
1 SUCTION COMPARTMENT HOOD
2 BATTERY COMPARTMENT WITH 12V
BATTERIES
3 BATTERY COMPARTMENT HOOD
PHOTO H DC 24V MODEL
1 SUCTION FILTER
2 VACUUM MOTOR COMPARTMENT
PHOTO I DC 24V MODEL
BATTERY CONNECTION DIAGRAM
PHOTO L
1 SUCTION HOSE CONNECTOR
2 SQUEEGEE INCLINATION ADJUSTING KNOB
3 SQUEEGEE BLADES REPLACEMENT KNOB
4 SQUEEGEE BUMPER WHEEL
5 SQUEEGEE PRESSURE ADJUSTING KNOB
6 SQUEEGEE WHEEL
7 SQUEEGEE FIXING KNOB
PHOTO M
1 SPLASH GUARD FIXING SPRING CLIP
2 SPLASH GUARD
PHOTO M
1 BRAKE LEVER
4.2.2. BATTERY
If supplied, the Pb-Acid (if not dry charged) or gel bat -
teries are ready to be installed:
Positive pole - red
Negative pole - black
4.3. ACCESSORIES
Your machine supplier can provide a complete and
updated list of all available accessories, such as
brushes, scrapers, disks, etc.
29