Mode Settings - Uline Rubbermaid Microburst 3000 Manual Del Usuario

5. If desired, turn beeping tone on or off by using the
TONE button. (See Figure 5)

MODE SETTINGS

The MODE button can be used to:
• Set spray frequency.
• Change current time.
• Choose between 12- or 24-hour operation.
• Set 12-hour operation start time.
• Set current day of the week.
• Set to work 5, 6 or 7 days per week.
SET SPRAY FREQUENCY
1. To set spray frequency, press MODE until
HI
is displayed and then use ADJUST button to select
between low (30), medium (60) and high (90). When
desired spray frequency is shown, press ENTER until
the home screen is displayed. (See Figure 6)
Figure 6
PAGE 2 OF 12
SETUP CONTINUED
Figure 5
LO ME
, or
CHANGE CURRENT TIME
1. To set current time, press MODE until the time screen
is shown. Use ADJUST to set current time. When
finished, press ENTER until home screen is displayed.
(See Figure 7)
Figure 7
CHOOSE BETWEEN 12- OR 24-HOUR OPERATION
1. To select between 12- or 24-hour operation, press
MODE until 12 or 24 is displayed. Use ADJUST to
change between the two. If 12-hour operation is
selected, use ADJUST to select when 12-hour period
should begin. Press ENTER until home screen is
displayed. (See Figure 8)
8 12
16 24
Figure 8
0321 IH-7682