3 Placement; 4 Start To Use; The Arrangement Of Bottle - EAS ELECTRIC EMR24VN1 Manual De Instrucciones

2.3 Placement

2.4 Start to use

2.5 The arrangement of bottle

l Do not let bottle touch the
l
The bottle number here may be different from bottles in different shape and size.
l
The capacity for bottle storage in the wine cabinet is based on the following marked bottle size. Oversized
bottle may have impact on the number of bottle storage in the wine cabinet.
( The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor )
Before using the cooler,
remove all packaging
materials including
bottom cushions and
foam pads and tapes
inside the cooler, tear
off the protective film on
the door and the cooler
body.
Avoid direct sunlight and
heat sources such as
stove, heating radiator,
etc.
The cooler shall stay for half an hour before connecting power when it is firstly
started.
Clean up the inner chamber before put into use for first time .
Do not connect cooler to electronic energy saving plug and converter that can
convert DC into AC (E.g.: solar energy system, ship grid).
Water drop or frost will be generated on
is running, which is decided by function of cooler.
not needed a s the back will wipe them out automatically. The defrosted water will be
collected into drain tank, then inflow into water disposal pan above the compressor
and vaporized.
back side of wine cooler
30mm
75mm
215mm
back side of wine cooler
wiping out frost or water drop is
in order to maintain good air circulation in the cooler.
300mm
8
The cooler is placed in a well-
ventilated indoor place; the
ground shall be flat, and sturdy
(rotate left or right to adjust the
feet for levelling if unstable).
The top space of the cooler
shall be greater than 30cm,and
the distances from bothsides
and backside shall be more
than 10cm to facilitate heat
dissipation.
when compressor
V.1