Advanced Settings Screen - Briggs & Stratton 076180 Manual Del Usuario

Advanced Settings Screen

Advanced Settings parameters are preset at the factory for a typical installation. To view Advanced Settings items or to
change the settings, follow the instructions listed below.
NOTICE
Advanced Settings are critical to the operation of the generator. Careful consideration should be taken when
selecting the parameters for generator operation. Before operating the generator, confirm that all settings are correct.
To enter the Advanced Settings menu, press and hold the left arrow, right arrow, and escape key for 3 seconds. Press these
same three buttons again to change a setting. After each confirmation of a setting, the selection will display for 2 seconds
before moving to the next item. Follow the prompts as outlined below.
KW
or
HZ
or
PHASE
or
VOLTS
or
CAN BUS TEST
or
SOFTWARE VERSION
DISPLAYED
8
KW
FLASHING
or
50/60 Hz
FLASHING
or
SINGLE
or
THREE
FLASHING
or
VOLTS
FLASHING
or
ON
FLASHING
or
BRIGGSandSTRATTON.COM