Craftmade VE56 Instrucciones De Instalación página 6

8b
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J" hook.
Tighten zip tie securely. For Industrial Mounting bracket, lift fan onto the
mounting bracket hook (2).
OUTLET BOX
"J" Hook (S9)
NOTE: Parts furnished will allow
you to install your fan at up to a 35°
angle. Angles greater than 35° will
require a 45° angle adapter (see
dealer). NOTE: J Hook installation
is a Canadian requirement only.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
All manuals and user guides at all-guides.com
Step 8b
Support Beam
"J" Hook (S7)
Outlet Box (A)
Ceiling
Mounting Bracket (2)
Zip Tie (S10)
Safety Cable
9
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S5) are provided for
your convenience.
2. After connections are made, turn
splices upward and push
carefully into outlet
Ground
box.
White (Neutral)
There are 3 colored
wires coming from
Black (Power)
the top of the
motor (including ground
wire).
White
Black
Wire Connnections
Outlet Box Fan wires
Black Black
(Hot wire for fan)
Green Green
(Ground wire)
White White
(Neutral wire)
Step 9
Wire
Connectors
(S5)
Ground
(Green)
Outlet Box
Ground (Green)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)