Descargar Imprimir esta página

Using Extension Cords; Before Use - Hilti VC 300-20-W Manual De Instrucciones Original

Publicidad

Idiomas disponibles

Idiomas disponibles

Max. vacuum
Container capacity
Water capacity
Operating temperature
Filter cleaning
AC frequency
Mains connection (type)
Protection class
Protection class
5

Using extension cords

WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
Use only extension cords of a type approved for the application and with conductors of adequate gauge
(cross section). The power tool may otherwise suffer a drop in performance and the extension cord may
overheat.
Check the extension cord for damage at regular intervals.
Replace damaged extension cords.
When working outdoors, use only extension cords that are approved and correspondingly marked for
this application.
Information on recommended minimum conductor cross-sections and cable lengths is accessible via
a link, in the form of a QR code, at the end of this document.
6

Before use

DANGER
Electrical hazards. Fatal or serious injury may result if the vacuum cleaner is not correctly connected to the
electric supply.
▶ Connect the vacuum cleaner only to a properly earthed/grounded power source.
CAUTION
Risk of injury presented by the appliance running away out of control. The vacuum cleaner may run
away out of control if the wheel brakes are not engaged.
▶ Engage the wheel brakes so that the vacuum cleaner stands securely.
6.1
Operating the appliance for the first time
1. Open the two catches.
2. Lift the suction head off the waste material container.
3. Remove the accessories and packaging from the waste material container.
4. Set the suction head on the waste material container and close the two catches.
5. Check to ensure that the vacuum cleaner top section is fitted correctly and secured.
6. Connect the suction hose to the appliance.
*2333434*
VC 300-20-W
3.0 psi
(20.8 kPa)
20 liq. gal
(75 ℓ)
14 liq. gal
(52 ℓ)
32 ℉ ... 104 ℉
(0 ℃ ... 40 ℃)
manual
50 Hz ... 60 Hz
SJTW-A 3×14 AWG
I
IPX4
2333434
US
US
English
7

Publicidad

loading