Original operating instructions
1
Information about the documentation
1.1
About this documentation
•
Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
•
Observe the safety instructions and warnings in this documentation and on the product.
•
Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2
Explanation of symbols
1.2.1
Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2
Symbols in the documentation
The following symbols are used in this documentation:
Read the operating instructions before use
Instructions for use and other useful information
1.2.3
Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3
Product-dependent symbols
1.3.1
Symbols on the product
The following symbols are used on the product:
Warning: hot surface
*2333434*
2333434
English
1