Horizon Fitness T101 Manual Del Propietário página 12

ASSEMBLY STEP 3
PART TYPE
A BOLT
B SPRING WASHER
C FLAT WASHER
12
HARDWARE FOR STEP 3
DESCRIPTION
M8X1.25PX20L
8.2X15.4X2T
8.4X15.5X6T
RUNNING
DECK
1
CONSOLE CABLE
2
A Open HARDWARE FOR STEP 3.
QTY
B Attach LEAD WIRE to bottom end of CONSOLE
4 CABLE. Pull LEAD WIRE through RIGHT
CONSOLE MAST (1). After pulling the lead wire
4
through the mast, the top of the CONSOLE CABLE
4
should be located at the top of the mast.
C With the RUNNING DECK in the raised position,
attach the RIGHT CONSOLE MAST (1) to the
BASE FRAME (2) using 4 BOLTS (A), 4 SPRING
WASHERS (B) and 4 FLAT WASHERS (C).
NOTE: Do not tighten bolts completely
until after the console is assembled.
A
B
C
A C
B