Bellman & Symfon BE1431 Manual Del Usuario página 56

Customizing the signal
The telephone transmitter controls the signal pattern on the receiver. Use the
signal switches to customize the signal pattern.
 How to customize the signal pattern
Move the signal switches on the Telephone transmitter according to
1
the tables on the following spreads.
Please note: The signal pattern may differ depending on the receivers.
Changing the radio key
All Visit products are set to the same radio key from factory and all switches are
positioned down=off per default. You can set a unique radio key for each system
to avoid radio interference when you install multiple Visit systems.
 How to change the radio key
Move the desired radio key switches
Please note: All Visit products within the same system must be set to the same
radio key in order to operate as a group.
107 Installer's Guide
to the up=on position.
2
Signal switches Up = On
(See table)
Down = Off
1
Installer's Guide
2
108