Teka FG-824.3 Instrucciones Para El Uso, Mantenimiento E Instalacion página 35

CONNECTION
At the bottom of the oven surround you will find a rating plate specifying the gas used for
calibration. If you are using exactly the same type of gas, carefully follow the connection
instructions. If not, the oven must be adapted to the type of gas available before following the
connection instructions.
Connection instructions (fig. 3)
The appliance must be connected to the gas supply by means of a rigid metal pipe or a metal
hose in compliance with the regulations in force in the country (UNI 9891).
The connection between the gas ramp coupling and the pipe must be made as follows:
1. tapered fitting (ISOR7) with seal on thread plus addition of suitable sealing agent;
2. by fitting an approved sealing gasket (aluminium, copper, rubber) in-between.
WARNING: application of a rubber hose to the hose fitting is not allowed because it
cannot be inspected.
All manuals and user guides at all-guides.com
guarnizione
Tubo flessibile
Fig. 3
33