Grouw 68141 Manual De Instrucciones página 37

Assembly
Note! The assembly instructions refer to the
position numbers in the fi gures 1A, 1B and
1C below.
Push the lower shaft (17) into the upper shaft
(12).
Be sure the holes align with each other and
that the cord is not lined up with the holes.
Join the two shafts using a bolt (14) and a
wing nut (10).
Insert the lower shaft (17) into the motor
housing (35). Make sure to turn the shaft so
that the groove fi ts. Place the cover (8) on
the side of the motor housing and secure the
lower shaft to the motor housing using two
screws (13).
Position the support grip (9) so that the hole
in it lines up with the holes in the fi tting.
Insert a bolt (11) into the fi tting and secure
the support grip using a wing nut (10).
GB
37