Connecting External Equipment - A Guide To Connecting Equipment To The Back Of The Tv - Toshiba stasia 26/32WL36 Manual Del Usuario

Connecting external equipment
Before connecting any external equipment, turn off all main power switches.
COMPONENT VIDEO INPUT (EXT 1) COMPONENT VIDEO INPUT (EXT 2)
COMPOSITE VIDEO
INPUT (EXT 1)
WE RECOMMEND THAT YOU USE SCART LEADS IN
ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
through the decoder and/or through the video
recorder to the television.
Scart leads:
Connect the video recorder IN/OUT socket to the TV.
Connect the decoder TV socket to the TV. Connect the
video recorder SAT socket to the decoder VCR socket.
Before running Auto tuning put your decoder and
video recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
In addition there is a fixed/variable external audio
output which enables the connection to a suitable Hi-Fi
unit, make sure the Speaker option in the Sound
menu is set to Off.
All manuals and user guides at all-guides.com
INPUT 3 (EXT 3)
COMPOSITE VIDEO
INPUT (EXT 2)
decoder*
IN
OUT
TV VCR
video recorder
IN/OUT SAT
6
SCART 4 (EXT 4)
SCART 3 (EXT 3)
SCART 5 (EXT 5)
the back of your TV
IN
OUT
A wide variety of external equipment can be
connected to the back of the TV, therefore the
relevant owners manuals for all additional
equipment must be referred to.
We recommend Scart 4 or 5 for a decoder and Scart 3
for a VCR.
If connecting S-VIDEO equipment, set the INPUT for
EXT3. See page 40.
If the TV automatically switches over to monitor
external equipment, return to normal TV by pressing
the desired programme position button.
To recall external equipment, press
between EXT1, EXT2, EXT3, EXT4, EXT5, EXT6 or
RGB/PC.
B to select