KlipXtreme KMM-400 Instrucciones De Montaje página 5

5. Using the Phillips screw Allen wrench combination, insert the first two screws (M-A, M-B)
and washers (M-C) in the upper mounting holes on the back of the monitor.
6. Then simply slide the monitor onto the VESA plate by aligning the pear-shaped slots with
the screws attached to the monitor, until it is properly positioned in place.
7. Proceed to insert the other two screws (M-A, M-B) and washers (M-C) through the lower
mounting holes of the VESA plate. Tighten with the Phillips screwdriver to securely mount
the monitor to the arm. When doing so, be careful not to overtighten the screws.
8. Once the monitor is mounted, adjust the tension of the spring using the supplied Phillips screw
Allen wrench combination. For heavier displays turn the screw counterclockwise and for
lighter displays turn it clockwise. Adjust the tension of the pneumatic spring until the displays
keeps its position when you let it go. Remember not to overtighten the screw.
Note: Be sure to keep the arm horizontally during adjustment; otherwise, it would be difficult
to adjust it or you could damage the mount.