Kärcher KMR 1250 BAT Manual Del Usuario página 20

1 Key switch
2 Control lamp drive error
3 Battery charger control
4 Raise/lower side-brushes, right
5 Upper position: Raise roller brush
Central position: Lower roller brush (op-
erating mode "Fine setting")
Lower position: Lower roller brush (op-
erating mode "store in floating position")
6 Raise/lower side-brushes, left (Option)
7 Switch for two-hand operations
8 Operating hour counter
9 Lights
10 Raise/lower bulk waste flap
11 Parking brake/ operating brake
12 Tilt waste container
(Function only in connection with the
two-hand operations switch)
13 Raise waste container
(Function only in connection with the
two-hand operations switch)
14 Lower waste container
(Function only in connection with the
two-hand operations switch)
15 Blower
Operator console
16 Accelerator pedal, forwards
17 Accelerator pedal, reverse
18 Horn
19 Steering wheel
20 Battery socket
21 Open/ close device hood
EN
4
-
Open/ close device hood
Tilt the seat towards the front.
Open the device hood at the handle slot
(pull it upward).
Note
The device hood is held at the top by the
gas pressure spring.
Colour coding
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
19