Operation - HAMPTON BAY MEF2823CBWLG Guía De Uso Y Mantenimiento

assembly (continued)
12
Attaching the anti-tip device
to the wall
□ Determine the location of the fireplace and mark the
location on the wall for the other mounting bracket screw
holes (II). Using a drill or screwdriver, make holes in the wall
where marked.
□ If you are attaching to drywall or plaster, insert a wall
anchor (FF) into each hole in the wall.
□ Position the mounting bracket (EE) over the holes in the
wall and use the large screws (II) to securely attach the
mounting bracket (EE) to the wall.
13
Securing the anti-tip device
WarninG: This product is only a deterrent. It is not a
substitute for proper adult supervision.
□ Place the mantel so the mounting bracket (EE) on the back
edge is in alignment with the mounting bracket (EE) on the
wall.
□ Place an end of the nylon strap (GG) down through each
mounting bracket (EE). Bring both ends together and slide
the end of the nylon strap (GG) through the slot in the other
end until snug. Pull down on the end until it snap locks into
the slot.
□ Check to ensure the nylon strap (GG) is securely laced and
locked to the mounting brackets (EE).

Operation

Refer to your firebox insert manual for operation instructions.
All manuals and user guides at all-guides.com
10
EE
FF
II
WALL
GG
DD
MANTEL
II
EE