assembly (continued)
10
Attaching the corner brace
□ Locate the corner brace (J). Insert two wood dowels (AA)
into the top and bottom of the corner brace (J).
□ Align the holes in the corner option piece (I) and the base
(A) with the wood dowels (AA) in the corner brace (J). Push
in until flush.
□ Insert one large bolt (BB) and one washer (CC) into the hole
at each end of the corner brace (J). Tighten until secure. Do
not strip the bolts by overtightening.
11
Attaching the anti-tip device
to the mantel
WarninG:
Young children may be injured by tipping
furniture. The use of a tipping restraint is highly
recommended. This hardware, when properly installed,
could provide protection against the unexpected
tipping of furniture due to improper use.
□ Attach one of the mounting brackets (EE) securely to the
back edge of the mantel. Use the small screws (HH) to
secure.
nOTe: If using the corner option piece, mounting brackets
must be placed on both edges that touch the walls.
All manuals and user guides at all-guides.com
9
A
Please contact 1-877-527-0313 for further assistance.
I
CC
BB
J
AA
EE
HH
HOMEDEPOT.COM