Panasonic TY-ST10-H Instrucciones De Instalación página 8

Attach to the display console
1. Attach the connection cables to the display.
Blankets, soft
cloths or similar.
Display console
* Place clean blankets or similar
on a level floor or table,and place
the display on top of them facing down.
2
. Insert the poles into the holes
in the display console.
Display console
( Rear of display )
Position the side of the pedestal with the model
no. label to the rear. Push the assembly into the
display until it stops.
Cable Binding Instructions
■ Bind all cables to the PDP base with the supplied binding strap.
Rear View
Binding strap
Cables
8
All manuals and user guides at all-guides.com
Model no. label
While ensuring there is sufficient slack in the power cord to minimize
stress, firmly bind all cables with the supplied binding strap.
Binding the Cables
Pass the binding strap
through the strap anchor.
Strap anchor
Display console
( Rear of display )
3. Fasten with screws
Display console
( Rear of display )
Long screws
Securely fasten using long screws
* Work on a level and stable surface.
Unbinding the Cables
Pull.
Pull.
Bundle all
cables tidily.
Long screws
.
Pull clip.