Install The Indoor Unit; How To Connect The Pipes And Wires - Carrier 42QZA009DS Manual De Instalación

2. INDOOR UNIT INSTALLATION

2.2 INSTALL THE INDOOR UNIT

2.2.1 Fix the hook with tapping screw onto the wall.
2.2.1 Hang the indoor unit on the hook.

2.3 HOW TO CONNECT THE PIPES AND WIRES

2.3.1 Push the two switches simultaneously, then open the panel.
2.3.2 Remove the string and take off the panel.
GB-7 7
All manuals and user guides at all-guides.com
Hook
Tapping
screw
Washer
No gap between unit and the ground
＜6mm
CAUTION
The unit must be installed vertically.
There should be no gap between unit and the
ground.