How To Operate Your Ceiling Fan (A1/C1) - Fanimation Distinction myFanimation A1 Serie Manual Del Propietário

How to Operate Your Ceiling Fan (A1/C1)

IMPORTANT:
1. Using a full range dimmer switch
(not included) to control fan speed will damage the fan.
To reduce the risk of fire or electrical shock, do not use
a full range dimmer switch to control the fan speed.
(Figure 1)
2. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 2)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
Do not operate this fan with a variable (Rheostat) wall
controller or dimmer switch. Doing so could result in
damage to the ceiling fan's remote control unit.
3.Remote button functions are as follows: (Figure 3)
DOWN LIGHT ON/OFF: Press and release
button immediately to turn light on or off.
LIGHT DIMMER: Press and hold to dim or
brighten light to desired level and release.
Dimming feature is not available with certain bulbs,
i.e. CFLs
: Turns off ceiling fan.
: Turns on ceiling fan to high speed
: Turns on ceiling fan to medium speed
: Turns on ceiling fan to low speed
: Press and release immediately to set fan
direction in forward or reverse.
NOTE: To use your smart device to control your
receiver, download the fanSync app from your app
store. Visit www.fanimation.com/fanSync
All manuals and user guides at all-guides.com
16
For illustrative purposes only-not
intended to cover all types of controls
Figure 1
Figure 2
Figure 3
MAIN FUSE BOX